TRAILER ITEMS

Black and Decker drill with cases, drill bits and sockets

10 x 20 EZUP canopy aluminum, new blue cover

Kyobi  Electric drill with cases, drill bits and sockets

1 set of black Yamaha race gloves size M

1 new set of blue Held Race gloves size 8.5

1 set Tyre Sox

Pole position Chicken Hawks Tire warmers

DMP tire warmers

1 commercial set of jumper cables

2 motorcycle handle bar tie downs

Magnetic parts dish

Rear wheel alignment tool from Rhino Moto

1 small green tool box of electrical wire, tape, fittings, pliers

1 blue tool box: gasket adhesives, silicones, electrical screwdriver

1 tool box of large sockets: 36mm to 57mm with

Dremmel, accessories and case

Bosch drill and case

DeWalt rotary Sander

DeWalt drill accessory box (drills, straight and Philips screwdriver bits, countersink bits, screw holders of various lengths)

Screwdriver set (20 piece) of sockets and screw driver blades

Craftsman Hacksaw

Fork seal and drivers, 39mm, 41mm, 43mm, 45mm

Caftsman Tap and dye set

2 pipe cutters 1 1/2” diameter.

1 set of Craftsman T Handle Allen 2.5mm to 8mm (grey handles)

3 containers of safety wire

Motion Pro chain breaker/clamping tool Chain breaker tool

Vacuum speed bleeder with attachments

1 set of Motion Pro mechanics gloves

Jack stands

BLACK KOBALT  18 DRAWER 2 PIECE PROFESSIONAL BOX

Tire pyrometer

Full set of metal working files

Full set of metric taps and dyes

Full set of chisels and center punches

Set of 3 crescent wrenches

2 breaker bars 3/8” driver, 10” and 16” long

1 large crescent wrench

1 breaker bar ½” drive 16” long

Full set of machinist drill bits from 1/16” to 1 inch

Various dental pick sets

2 deburing tools with spare blades

Full sets of Philips and regular screwdrivers, both small and large

Full set of Allen sockets, 3/8” drive, from 2.5mm to 17mm

24mm and 1 x 1” combination wrench

2 torque wrenches , cylinder set with 3/8” drive

1 torque wrench electronic with 3/8” drive

Several sockets from 36mm to 57mm for axle nuts

Full set of 6 vice grips

1 set of 3 Craftsman sockets that grab onto disfigured bolts.

Set of Motion Pro T handle screwdrivers, Philips head

2 Vernier calipers, one dial gauge on digital

Loctite blue, red, green

Propane Torch

Box end ratchet wrench set

Air Tools:

rotary sander/grinder,

3’ air line, various attachments.

various rotary wheels (wire, paper, solid),

WORK TOOLS

CRS Tuning Banner

CRST services/cost sandwich board

10 x 10 EZUP Yamaha canopy, old cover torn in several places

1 Ducati Pit Bull front stand arm

1 Pit Bull singled sided swing arm stand

6 folding chairs, blue

3 extension cords (regular gauge in orange)

1 yellow heavy duty 110w extension cable

4 surge protectors

30 plus tie downs

3 canyon dancers

4’ length of rolled aluminum preload spacer

2 Various bolt/nut/washer for track day rider emergencies

SUSPENSION TOOLS:

Two sets of cartridge rod holding tools for vice jaws

Two sets of lower cartridge holding tools for cartridge inside fork leg

Two bleed rods and 8 brass fittings

Two oil level siphons (Race Tech)

Safety glasses

12 liters of Motorex 5w oil

3 sets of various size drill bits

Various size and thickness washers for fork internals

RED 5 COMPARTMENT TOOL BOX

Tire pressure gauge

3 metric tape measures

Telescopic magnet and telescopic mirror

2 sets of feeler gauges

1 multi axle nut tool

1 Stanley knife with blades

1 set of dental picks

1 x 1 ½” breaker bar

1 set ¼” 6mm to 14mm 6 point sockets with ratchet and extension

1 set of Torx 3/8” sockets (6)

2 sets of combination wrenches, 8mm to 24mm

1 set of needle nose pliers

1 set of vice grips (Costco)

1 set of Craftsman small straight edge screwdrivers.

1 set of jewelry screwdrivers

Set of center punches and chisels

Multiple preload adjusting tools including modified screwdriver

2 sets of mechanix gloves

1 vernier caliper

2 deburring tools

Set of small files (6)

Set of Allen sockets (10)

1 x  8mm,10mm,12mm,17mm Snap On brand 3/8” drive sockets